Zebralight SC700Fd 21700 XHP70.2 Floody Neutral White High CRI Flashlight

Reviews: Be the first to review this product

Availability: In stock

€99.30

Quick Overview

Zebralight SC700Fd 21700 XHP70.2 Floody Neutral White High CRI Flashlight

Description:

Main features and specifications

LED: Cree XHP70.2 neutral white LED
Nominal CCT: 5000K
CRI: 90+
Tin deviation: 3-step
User selectable levels: 3 main levels (High, Medium and Low). Each main level can be programmed on one of the two sub levels. The second sub-level of each main level can be further programmed at different brightness levels.
Light output (duration)
High: H1 2910 Lm (PID, approximately hours) or H2 1414 Lm (PID, approximately hours) / 916 Lm (PID, approximately hours) / 565 Lm (hours)
Average: M1 186 Lm (hours) or M2 50 Lm (hours) / 24 Lm (days) / 11.2 Lm (days)
Low: L1 2.0 Lm (days) or L2 0.31 Lm (month) / 0.11 Lm (months) / 0.04 Lm (months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating voltage range: 2.7V - 4.3V
Battery: one unprotected flat top 21700 format 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
Parasitic drainage: negligible (much less than the self-discharge of a battery)
Jet type
Floody beam of matte lens, with diffusion of 90 degrees
Dimensions
Main diameter: 1.5 inch (38.1 mm)
Body diameter: 1.1 inch (28 mm)
Length: 4.2 inches (106 mm)
Weight
91 grams without battery
Characteristics
PID thermally regulated outputs (three highest output levels)
Built-in battery protectors with continuously monitored temperature, current and voltage, plus a (2.7 V) low voltage switch-off
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatically resign from High to Medium, and from Medium to Low when the battery is low
Durable electronic soft-touch switch
Beryllium copper springs in all pogo pins for extremely low electrical resistance
Smart user interface provides fast and easy access to all brightness levels and beacon flash units.
Accurately machined unibody housing made of premium aluminum bar material
Direct thermal sink for optimum heat dissipation from the LED to the one-piece aluminum housing
Durable natural hard anodized finish (Type III Class I)
Closed and encapsulated LED control circuit
Frosted Corning Gorilla Glass lens
Battery reverse polarity protection
Pocket clip
Waterproof up to IPX8 (2 meters, 30 minutes)
Activities
This light has 3 main levels (High, Medium and Low) and a beacon strobe mode. Each main level can be programmed on one of the two sub levels. The second sub-level of each main level can be further programmed at different brightness levels.

Basic Operation
A short click switches the light on High or switches the light off.
A short click twice switches the light to Medium.
A short click of three turns the light on to the beacon strobe mode.
Pressing and holding (longer than 0.6 seconds) switches the light to Low and then Medium and High. Release at the desired level.
Advanced operation and configuration
Hold to scroll from Low, Medium and High, release at the desired level to set. When you hold down, the light always goes from low to high, no matter what level you are currently in.
Double-click to switch and select between the two sub-levels for that main level. Sub level selections for the 3 main levels are remembered after the light is turned off and the battery is replaced.
The second sublevel (H2, M2 and L2) of each main level can be further programmed at different brightness levels. Double-click the top level 6 times to start the configuration. The next time you double-click, the light passes through different brightness levels. Short click to turn off the light when completing configurations. The selections for the second sub-levels are remembered after the light is switched off and the battery is replaced.
This light uses the main LED (which blinks 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) 4 short clicks without pause.
The beacon strobe mode is accessible via 3 short clicks when the light is off. In beacon-strobe mode, you can double-click to scroll through different types of beacons and flash units. Beacon strobe settings are saved when the light is switched off and the battery is replaced.
PID temperature control temperature control for three highest output levels
Switch off the light from H1 and then back into H1
Hold to scroll 6 times from Low to High
Release the switch during the 7th (or more) cycle
if High, to add 1 degree C (maximum 5)
when Med, to return to the factory settings
if low, to subtract 1 degree C (maximum 5)
Multiple mode groups

Zebralight SC700Fd 21700 XHP70.2 Floody Neutral White High CRI Flashlight

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

.

Additional Information

Brand  Zebralight
EAN/GTIN  7417940524436
ANSI Lumen 2,910.00
Flashlight needs  21700 battery
LED type  XHP70.2
LED colour  High CRI
Flashlight type  Daily use