Description
Details
Zebralight SC600w Mark IV Plus 18650 XHP50.2 Neutral White Flashlight
Cree XHP50.2 Neutral White led (Nominal CCT 4500K)
Cree XHP50.2 Neutral White LED
Nominal CCT: 4500K
CRI: 80+
Tint deviation: 3-step
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1 2300 Lm (PID, approx. 1.8 hours) or H2 1311 Lm (PID, approx. 2 hours)/705 Lm (PID, approx. 2.5 hours)/358 Lm (5.1 hours)
Medium: M1 171 Lm (12.1 hours) or M2 77 Lm (26 hours)/33 Lm (2.5 days)/13 Lm (6 days)
Low: L1 5.0 Lm (13.5 days) or L2 1.8 Lm (1 month)/0.6 Lm (2 months)/0.2 Lm (3.5 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 2.7V - 6.0V
Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
80 degree spill
14 degree hot spot
Dimensions
Head Diameter: 1.2 inch (30 mm)
Body Diameter: 0.98 inch (25 mm)
Length: 3.8 inch (96 mm)
Weight
2.26 oz (64 gram) without battery
Features
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Tempered optical grade glass
Orange peel textured reflector
Battery reverse polarity protection
Pocket clip
Lanyard ring
Waterproof to IPX8 (2 meters, 30 minutes)
This light needs batteries of 65mm long, it does not work with protected batteries (like from Keeppower, EagleTac or Enerpower) because these are too long.
Cree XHP50.2 Neutral White led (Nominal CCT 4500K)
Cree XHP50.2 Neutral White LED
Nominal CCT: 4500K
CRI: 80+
Tint deviation: 3-step
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1 2300 Lm (PID, approx. 1.8 hours) or H2 1311 Lm (PID, approx. 2 hours)/705 Lm (PID, approx. 2.5 hours)/358 Lm (5.1 hours)
Medium: M1 171 Lm (12.1 hours) or M2 77 Lm (26 hours)/33 Lm (2.5 days)/13 Lm (6 days)
Low: L1 5.0 Lm (13.5 days) or L2 1.8 Lm (1 month)/0.6 Lm (2 months)/0.2 Lm (3.5 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 2.7V - 6.0V
Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
80 degree spill
14 degree hot spot
Dimensions
Head Diameter: 1.2 inch (30 mm)
Body Diameter: 0.98 inch (25 mm)
Length: 3.8 inch (96 mm)
Weight
2.26 oz (64 gram) without battery
Features
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Tempered optical grade glass
Orange peel textured reflector
Battery reverse polarity protection
Pocket clip
Lanyard ring
Waterproof to IPX8 (2 meters, 30 minutes)
This light needs batteries of 65mm long, it does not work with protected batteries (like from Keeppower, EagleTac or Enerpower) because these are too long.
Additional Information
Details
Main Features and Specifications
- Cree XHP50.2 Neutral White LED
- Nominal CCT: 4500K
- CRI: 80+
- Tint deviation: 3-step
- User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
- Light Output (runtimes)
- High: H1 2300 Lm (PID, approx. 1.8 hours) or H2 1311 Lm (PID, approx. 2 hours)/705 Lm (PID, approx. 2.5 hours)/358 Lm (5.1 hours)
- Medium: M1 171 Lm (12.1 hours) or M2 77 Lm (26 hours)/33 Lm (2.5 days)/13 Lm (6 days)
- Low: L1 5.0 Lm (13.5 days) or L2 1.8 Lm (1 month)/0.6 Lm (2 months)/0.2 Lm (3.5 months)
- Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
- Operating Voltage Range: 2.7V - 6.0V
- Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
- Parasitic Drain: Negligible (much less than the self discharging of a battery)
- Beam Type
- 80 degree spill
- 14 degree hot spot
-
- Dimensions
- Head Diameter: 1.2 inch (30 mm)
- Body Diameter: 0.98 inch (25 mm)
- Length: 3.8 inch (96 mm)
-
- Weight
- 2.26 oz (64 gram) without battery
-
- Features
- PID thermal regulated outputs (three highest output levels)
- Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
- Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
- Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
- Durable electronic soft-touch switch
- Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
- Precision machined unibody casing from premium grade aluminum bar stocks
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
- Durable natural hard anodized finish (Type III Class I)
- Sealed and potted LED driver circuitry
- Tempered optical grade glass
- Orange peel textured reflector
- Battery reverse polarity protection
- Pocket clip
- Lanyard ring
- Waterproof to IPX8 (2 meters, 30 minutes)
-
Accessories in the package
- Two o-rings
- Pocket clip
Reviews
Customer Reviews
- Love at first light Review by Martin the swede
-
Rating
Pros:
Zebralight quality
Super bright
Programmable
A lot of flashlight in a small package
Good trade-off between throw and flood
Cons:
On the edge of being too heavy to clip to the cap and use as headlamp (but it works)
You have to tighten the tail cap pretty hard for it to work properly, with flat top batteries
All in all, the best flashlight I've ever used. Strongly recommend it! (Posted on 31-08-21) - My choice for Year 2020 Review by Yves Soussi
-
Rating
I own most of the main flashlight (Fenix HP12, Zebralight H600 mkIV, SC64, etc )
After one year of test the winner is =
The best is Zebralight SC600w Mark IV Plus 18650 XHP50.2 Neutral White Flashlight
I had only flashlight, it will be my choice
Happy new year 2020
Bien à vous
YVES SOUSSI (Posted on 01-01-20) - Best flashlight I've seen till now Review by Andrei
-
Rating
It's powerful enough even on lower settings, and the spill is large enough to light a fire road. As a funny side effect, every one was asking me what light it is, and lots of people started to ride close to me just to benefit from the huge amount of light available when running in H1 mode :))
So for me this is the perfect MTB light I've experienced. (Posted on 22-04-19) - SC600w Mark IV Plus + Plastic Holder for Armytek Wizard (Pro) = Giant Zebra H600d Review by YVES SOUSSI
-
Rating
1) SC600w Mark IV Plus + Plastic Holder for Armytek Wizard (Pro) = Giant Zebralight H600d Mark IV XHP50.2 5000K High CRI Headlamp
Plastic Holder for Armytek Wizard feat perfectly ! You can have a Giant Zebralight H600d, headlamp
2) I love all amytek products (not only headband, etc) I use everyday the Tiara, and my next puchase will be a Wizard - In Paris, all the "Hobo" (young homeless people who live in the streets of Paris) , they all use Armitek flashlight..Guess why..
Bien à vous
YVES SOUSSI (Posted on 26-11-18) - Excellent light, excellent service from NKON Review by Spec
-
Rating
As usual, excellent service from NKON. Shipping to Canada was quick and inexpensive (albeit limited tracking). (Posted on 20-11-18) - LED XHP50.2 = in 5.0mm x 5.0mm package = 4 leds XP-E2 stitched together Review by YVES SOUSSI
-
Rating
1) LED XHP50.2 = in 5.0mm x 5.0mm package = 4 leds XP-E2 stitched together
165 lm/W , 18W, etc
You can see the 4 leds lithography through the lens of the XHP50.2.
2) Because I had a few camping & backpacking trips and love the light so much,
Under a tent, "M2" - 13 Lm (6 days) , is so bright you can read, write, do everything etc !!
6 days ! you can survive a long time with a single 18650
It is a miracle !!
Thank you VERY MUCH to Nkon
Bien à vous
YVES SOUSSI (Posted on 07-05-18) - Martian's most popular flashlignt !!!! For sale on earth. Limited quantities. Review by Yves Soussi
-
Rating
Martian's most popular flashlignt !!!! For sale on earth. Limited quantities.
1) A powerful machine, yet very small in your hand , a dragon which throw a fire of 2400 lumen out ot of a small chip XHP50.2 of silicon metal !
2) zero gravity and extreme temperatures
3) temperature sensor, POGO pins, electronic switches, and a littlle brain , clever as a large mainframe who concentrate all the data = voltage input , temperature, user information, programmed levels of light , constant current regulation and oscillator frequency .
4) memorize 16 levels of moonlight, medium or high power light levels
5) Amazing accuracy of the estimated battery remaining capacity for a 18650 flashlight
Flash once: lower than 20% - below 3.3V
Flash twice: 20%-50%
Flash 3 times: 50%-80%
Flash 4 times: higher than 80%
6) he greatest handheld light of the solar system
7) "Out of stock" at March's Nkon subsidiary . Availlable on earth for a few days !
Bien à vous
YVES SOUSSI (Posted on 04-05-18) - Power!! Review by THEODOSIS IOANNIDIS ARIDEA
-
Rating - Zebralight SC600w Mark IV Plus Review by Matthias
-
Rating
Meine erste Lampe war leider defekt und nach Absprache mit Elmer wurde die Lampe schnell getauscht! Ich kann den Shop nur loben habe schon mehrmals bestellt und immer ging es schnell und ohne Probleme vonstatten.
----------------------------------------------
The lamp is almost perfect for me because it produces an almost perfect homogenous light image indoors. in the outdoor area One has a very good illumination one does not believe what the little thing heraushaut out. There are of course other bulbs that are more trimmed to range, but do not enlighten the whole environment.
My first lamp was unfortunately broken and after consultation with Elmer the lamp was quickly replaced! I can only praise the shop have ordered several times and always it went quickly and without problems vonstatten. (Posted on 08-03-18)