Description
Details
Zebralight H600Fc mark IV Floody headlamp.
Uses a 18650 Li-ion battery
Headband is included. Battery is not included.
This lamp requires 65mm long batteries, it will not work with protected batteries (such as Keeppower, EagleTac or Enerpower) because they are too long.
Uses a 18650 Li-ion battery
Headband is included. Battery is not included.
This lamp requires 65mm long batteries, it will not work with protected batteries (such as Keeppower, EagleTac or Enerpower) because they are too long.
Additional Information
Details
Main Features and Specifications
- Cree XHP50.2 Neutral White LED
- Nominal CCT: 4000K
- Typical CRI: 93-95
- Tint deviation: 3-step
- User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
- Light Output (runtimes)
- High: H1 1568 Lm (PID, ) or H2 980 Lm (PID, )/562 Lm (PID, )/296 Lm ()
- Medium: M1 143 Lm () or M2 63 Lm ()/25.7 Lm ()/9.6 Lm ()
- Low: L1 3.3 Lm () or L2 1.0 Lm ()/0.3 Lm ()/0.08 Lm ()
- Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
- Operating Voltage Range: 2.7V - 6.0V
- Battery: One 18650 size (up to 69mm) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
- Parasitic Drain: Negligible (much less than the self discharging of a battery)
- Beam Type
- Floody beam from frosted lens, with 90 degree beam spread
-
- Dimensions
- Head Diameter: 0.95 inch (24.2 mm)
- Length: 3.85 inch (97.8 mm)
-
- Weight
- 1.4 oz (39 gram)
- 3.0 oz (84.6 gram) with ZL635 battery
- 4.4 oz (124.6 gram) with ZL635 battery and headband
-
- Features
- PID thermal regulated outputs (three highest output levels)
- Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
- Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
- Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
- Durable electronic soft-touch switch
- Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
- Precision machined unibody casing from premium grade aluminum bar stocks
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
- Durable natural hard anodized finish (Type III Class I)
- Sealed and potted LED driver circuitry
- Tempered optical grade glass
- Battery reverse polarity protection
- Waterproof to IPX8 (2 meters, 30 minutes)
-
Accessories in the package
- Two o-rings
- Headband with removable top strap, and a black silicone holder
Reviews
Customer Reviews
- Great headlamp. Review by Lukas
-
I bought it instead of AT Wizard XP-L. This one is lighter, brighter, more versatile. I love the UI. Color temperature and tint are perfect. Use it with Armytek headband. Absolutely recommended. (Posted on 14-07-21)Rating - brilliant for caving Review by Andras
-
it just works, bright, convenient, withstands everything from rocks, water, dirt. love it. (Posted on 10-09-19)Rating - Bad luck or dear buy something else... Review by Igor H
-
Hey guysRating
My lamp was broken after two uses.
The part must be returned to Zebralight for repair.
The fairy tales from the Internet for quick replacement of Zebralight ...
I wonder how long the repair will take in China ...
Finally, there are other manufacturers that produce in Europe. (Posted on 03-12-18)
