Description
Details
LED: Nichia 519A-V1
Rated CCT 4000K
Typical CRI: 93
Tint offset: 3 steps
User selectable levels: 3 main levels (high, medium and low). Each main level can be programmed to one of two sub-levels. The second sub level of each main level can be further programmed to different brightness levels.
Light output (running times)
High: H1 Lm (hrs) or H2 Lm (hrs) / Lm (hrs) / Lm (hrs)
Average: M1 Lm (hours) or M2 Lm (hours) / Lm (hours) / Lm (days)
Low: L1 Lm (days) or L2 Lm (month) / Lm (months) / Lm (months)
Beacon Strobe Mode: 0.2 Hz Beacon on Low / 0.2 Hz Beacon on H1 / 4 Hz Strobe on H1 / 19 Hz Strobe on H1
Light output are ANSI out the front (OTF) values. Running times tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. The remaining battery power, about 10-20%, after lowering is not counted towards runtimes.
Operating voltage range: 0.7V - 2.0V
Battery: One AA-size NiMH, lithium, or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
Parasitic Discharge: Negligible (much less than self-discharging a battery)
Jet type
Floody beam of frosted lens, with 90 degrees beam spread
Dimensions
Head Diameter: 0.86 in (21.8 mm)
Length: 2.9 inches (75mm)
Weight
31 grams
56 grams with an Eneloop AA battery
2.8 oz (79 grams) with an Eneloop AA battery and headband
Functions
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
All levels are currently regulated
Automatically switch back from High to Medium, and from Medium to Low when the battery is low
Durable electronic soft-touch switch
Smart user interface provides quick and easy access to all brightness levels and beacon flashes.
Precision machined unibody housing from high quality aluminum billets
Proprietary heat dissipation design connects the LED board directly to the unibody aluminum housing
Durable natural hard-anodized finish (Type III Class I)
Sealed and potted LED driver circuits
Battery reverse polarity protection
Optical quality tempered glass
Orange peel reflector
The battery power can be disconnected by slightly unscrewing the end cap to prevent unwanted activations or parasitic exhaustion
Waterproof to IPX8 (2 meters, 30 minutes)
Rated CCT 4000K
Typical CRI: 93
Tint offset: 3 steps
User selectable levels: 3 main levels (high, medium and low). Each main level can be programmed to one of two sub-levels. The second sub level of each main level can be further programmed to different brightness levels.
Light output (running times)
High: H1 Lm (hrs) or H2 Lm (hrs) / Lm (hrs) / Lm (hrs)
Average: M1 Lm (hours) or M2 Lm (hours) / Lm (hours) / Lm (days)
Low: L1 Lm (days) or L2 Lm (month) / Lm (months) / Lm (months)
Beacon Strobe Mode: 0.2 Hz Beacon on Low / 0.2 Hz Beacon on H1 / 4 Hz Strobe on H1 / 19 Hz Strobe on H1
Light output are ANSI out the front (OTF) values. Running times tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. The remaining battery power, about 10-20%, after lowering is not counted towards runtimes.
Operating voltage range: 0.7V - 2.0V
Battery: One AA-size NiMH, lithium, or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
Parasitic Discharge: Negligible (much less than self-discharging a battery)
Jet type
Floody beam of frosted lens, with 90 degrees beam spread
Dimensions
Head Diameter: 0.86 in (21.8 mm)
Length: 2.9 inches (75mm)
Weight
31 grams
56 grams with an Eneloop AA battery
2.8 oz (79 grams) with an Eneloop AA battery and headband
Functions
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
All levels are currently regulated
Automatically switch back from High to Medium, and from Medium to Low when the battery is low
Durable electronic soft-touch switch
Smart user interface provides quick and easy access to all brightness levels and beacon flashes.
Precision machined unibody housing from high quality aluminum billets
Proprietary heat dissipation design connects the LED board directly to the unibody aluminum housing
Durable natural hard-anodized finish (Type III Class I)
Sealed and potted LED driver circuits
Battery reverse polarity protection
Optical quality tempered glass
Orange peel reflector
The battery power can be disconnected by slightly unscrewing the end cap to prevent unwanted activations or parasitic exhaustion
Waterproof to IPX8 (2 meters, 30 minutes)
Additional Information
Details
.
