Description
Details
Minumum capacity: 3270mAh
Typical energy: 12.0Wh
Minimum energy: 11.4Wh
Standard charge current: 1.6A (0.5C)
Maximum charge current: 3.2A (1C)
Charge cut-off current: 64mA (0.02C)
Recommended charge end voltage: 4.10V / 160mA cut-off
Max. continuous discharge current: 6.4A (2C)
Discharge cut-off voltage: 3.0V
AC impedance at 1KHz: 29±5mΩ
Weight: 62±1.5g
Typical energy: 12.0Wh
Minimum energy: 11.4Wh
Standard charge current: 1.6A (0.5C)
Maximum charge current: 3.2A (1C)
Charge cut-off current: 64mA (0.02C)
Recommended charge end voltage: 4.10V / 160mA cut-off
Max. continuous discharge current: 6.4A (2C)
Discharge cut-off voltage: 3.0V
AC impedance at 1KHz: 29±5mΩ
Weight: 62±1.5g
Additional Information
Details
.
Reviews
Customer Reviews
- very good battery for the price Review by sid
-
spotwelded 150 pieces. using aliexpress welder -much faster than home made welder from car battery doing 20 welding spots on each side of the battery as nickel strip is not holding as good as on normal battery.Rating
satisfied (Posted on 13-06-23) - for the price they are good Review by sid
-
testec capacity 1 cell 2800mAH second 3300mAhRating
ordered 130 pieces.
spotwelded 20 yet. i have aliexpres spotwelder connected to car battery and just touching + pole on the battery with wire.
nickel strips holds but can be easily removed. but for stationary use it is ok. i am welding 8 dots to each pole of the battery to be sure it holds.
i was unable to solder a wire directly to the top of the battery.
satisfied for the price (Posted on 22-05-23) - perfect for powerbank. Review by roger
-
ordered a couple of powerbank cases from china for 8 21700 cells, a case is between 8 and 15 euros.Rating
put 8 of these in them and works perfectly.
real 25k powerbank that can do 12v as well for under 25 euros that actually has cells in it that i know are new and from a reputable brand, and not some crappy chinese ones.
can't beat that i think.
when removing the tags sometimes it leaves little high points from the welding, but these are easilly removed.
very happy (Posted on 06-01-23) - It is possible! Review by Tabasco
-
Just like Artjom, I wanted to try if spotwelding is possible on these cells for decent battery storage. Can't wait till we begin to see the LFP batteries outside... In the meantime, I wanted to limit the money flow towards... and go with this NCM cell.Rating
It is possible to spot-weld these batteries enough for a fixed battery storage if you have a decent spotwelder and play a little with setup. They do not hold if if pull very hard, but good enough for my use at least.
I used 0.15mm pure nickel(I think). (Posted on 07-10-22) - Best bang for your buck Review by BarNiy
-
They can be spot welded using 0.1mm nickel plated steel. I'm using a "Schmidt-Instrumente UIP-1000" with 1.3 ms / 500 W ~ for the positive aluminium capped side and 0.4 ms / 250 W for the negative side. (Posted on 02-07-22)Rating
Write Your Own Review
Take care
- Li-ion batteries can be dangerous when used wrong, short circuit or wrong usage can lead to fire or an explosion
- Do not put the battery in a charger or equipment with wrong terminals connected
- Never short cut the battery. Take care you don’t short cut it accidentally, do not put it in your pocked together with bunch of keys
- Do not disassemble or deform the battery. Dispose it if the battery is deformed
- Do not immerse in water
- Avoid excessive physical shock or vibration
- Do not expose to, dispose of the battery in fire
- Keep out of the reach of children
- Never use a modified or damaged charger
- Do not leave battery in charger over 12 hours
- Store the battery in a cool, dry and well-ventilated area
- Dispose of in accordance with local regulations
- Do not solder on these cells
