Zebralight SC600F Mark IV Plus XHP50 Floody Cool White 18650 Zaklamp

SC600F Mk IV Plus XHP50 Floody Cool White 18650 Flashlight Cree XHP50 Cool White led (Nominal CCT 5700K)

Cree XHP50 Cool White LED
Nominal CCT: 5700K
CRI: 70+
Tint deviation: N/A
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1 2260 Lm (PID, ) or H2 1289 Lm (PID, )/693 Lm (PID, )/352 Lm ()
Medium: M1 168 Lm () or M2 76 Lm ()/32.4 Lm ()/13 Lm ()
Low: L1 4.9 Lm () or L2 1.8 Lm ()/0.6 Lm ()/0.2 Lm ()
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Operating Voltage Range: 2.7V - 6.0V
Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
Floody beam from frosted lens, with 90 degree beam spread
Dimensions
Head Diameter: 1.2 inch (30 mm)
Body Diameter: 0.98 inch (25 mm)
Length: 3.8 inch (96 mm)
Weight
2.26 oz (64 gram) without battery
Features
PID thermal regulated outputs (three highest output levels)
Builtin battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Tempered optical grade glass
Orange peel textured reflector
Battery reverse polarity protection
Pocket clip
Lanyard ring
Waterproof to IPX8 (2 meters, 30 minutes)


This light needs batteries of 65mm long, it does not work with protected batteries (like from Keeppower, EagleTac or Enerpower) because these are too long. We recommend the Samsung INR18650-35E 3450mAh - 10A, because this battery fits perfect and can deliver enough Ampere.

This flashlight draws a very high current from the batteries. You MUST use unprotected 18650s capable of 8A or more, and from name brand manufactures. Unfortunately, only flat top unprotected 18650 batteries up to 65.2mm are compactible. The brightness can be perceived to be less compared to throwy lights with the same output.